ELECTRODYNAMIC® APPROVED PARTICULATE CEM
PCME STACK 990
QAL1 TÜV approved particulate monitor providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters
- Robust design unaffected by product build-up on the sensor rod
- No additional services such as air purge required, providing lower cost of ownership
- Simple maintenance no requirement for specialist service personnel
- Networking up to 16 sensor channels via Modbus and providing multiple inputs and outputs for external connections
- Extensively used for measurement (mg/m³) and leak location in bag filter stack applications
- Advanced sensor design includes drift checks (zero and span) and contamination checks
- Passive/Active and fully insulated sensor options available for applications with stack condensation and damp particulate prevents potential short circuit to stack wall
- Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
- After process dryers
- Variable velocities within range 8 – 20 m/s
(typical bag filter velocity ranges), constant velocity required outside this range - Non-condensing / dry flue gases
Typical Applications:
- Incineration
- Metals (eg Steel/Aluminium)
- Minerals (eg Cement/Gypsum)
- Chemicals (eg Detergent / Carbon Black)
- Power Generation Plant (eg Coal/Biomass)
| TECHNICAL SPECIFICATIONS | |
| Measured parameters | Dust |
| Technology | ElectroDynamic® Advanced Probe Electrification |
| Measurement/Monitoring capability | 0-1000 mg/m³* |
| Stack/Duct diameter suitability | up to 8m |
| Flue gas temperature | up to 800°C |
| Baghouse | YES |
| Cartridge Filter | YES |
| Ceramic Filter | YES |
| Coalescent Filter | YES |
| Cyclone | YES |
| Electrostatic Precipitator (ESP) | / |
| Wet Electrostatic Precipitator (WESP) | / |
| Wet Scrubber | / |
| Sensor variants | Stainless Steel Fully insulted PTFE coated Passive/Active |
| QA checks | YES |
* Application dependant
| TECHNICAL DATA | |
| Measurement capability | 0 – 1000 mg/m33 |
| Sensor Variants | 316 Stainless Steel / Fully insulated PTFE coated (option) / Passive/Active (option) |
| Stack Temperature Ranges | 0 -250°C up to 800°C (option) |
| Functionality and QA Checks | Automatic zero and span / Short circuit check / Contamination check / Drift checks |
| Data Output | RS485 (Modbus) output to Controller |
| Air Purge | option |
| Enclosure Protection Rating | IP66 |
- TÜV approved
- Ex Zone 2, 20
- US EPA MACT Compliant BLD
Datasheet
